AA BMW E60 M5 and E63 M6 Performance Parts




Active Autowerke BMW M5/M6 V10 Power Pulley

Looking to increase your V10's power output? Take a look at the Active Autowerke Signature V10 Power Pulley kit.  It comes mostly with everything to make this installation simple and easy to install, it is also reliable and trouble-free.  Best of all, it makes horespower.


2007 - E60 M5

2007 - E63 M6




When working on the BMW S54 engine of the E46 M3, Active Autowerke has found that additional horsepower can be attained with the installation of power pulleys. The S65 BMW V10 engine is no different where it also has to drive components like the the air conditioning and power steering.  These ancillary components actually take away power because they create a load on the engine since they all share the same drive belt design. Active Autowerke has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. The end result is unleashing untapped power just by redesigning the the drive ratios of the engine pulleys. An additional 12+ horsepower is measured on our in house Mustang dyno when compared against a stock BMW V10.


What was a solid block of T6061 billet aluminum will now be transformed into precise component with a calculated pulley diameter, proper groove pitch, and true belt alignment with a calculated pulley offset. The exterior is also treated in a hard, black anodized finish that is strong and durable to give a smooth and quiet operation that will be trouble-free.


All the necessary parts are included in the kit making for a relative simple, easy installation that looks similar to factory when installed and it makes power.  It can be fully reversible back to original if the need arises.


The power pulley is very modular in design and complements very well with other Active Autowerke performance products like the Active perfomance software or the Active performance exhaust. Truly a good start for the BMW M enthusiast.



Key Features:



HP gains: 10 RWHP ~ 12+ HP

Complete Bolt on System and is easily reversible

Aircraft Grade Billet 6061 Hard Coat Anodized Aluminum

Retains Factory Crank Hex Drive Adapter

Includes Replacement DRIVE and A/C Belts

Does Not Modify Factory Harmonics or Dampening

Reduces Rotational Mass

Does not cause overheating found in smaller pulley designs

Paired with the Active Software for Additional Gains

Price: $399.00




Active Autowerke BMW M5 & BMW M6 Performance Tune Software V10


The Active Autowerke BMW M5 BMW M6 Performance Tune Software will deliver your V10 motor to new performance heights. Through careful remapping to the DME and countless hours of tuning, this software upgrade covers all essential aspects to deliver horsepower and torque gains throughout the RPM curve on your BMW M5 BMW M6. Areas addressed include fuel, ignition, vanos and more. Adjustments were made specifically to the part throttle settings delivering a crisper/smoother shifts for an improved driving experience.


The Active Autowerke upgraded software is designed to operate with gasoline that has an average octane rating with full emissions to create a clean burning combustion with good AFR’s all within factory specifications.



Key Features:


    BMW horsepower gains throughout full RPM range

    Higher torque over factory settings throughout RPM range

    Recalibrated settings for a smoother and more responsive part throttle transition

    Tune made compatible to all variations of V10 ECUs

    Modified Vanos camshaft maps eliminating COLD START enable for a refined warm-up stage

    Raised RPM thresholds in specific gears for that sporty feel

    Crisper / Smoother shifts for models with SMG transmissions

    Available for 91 or 93 fuel octane rating

    Includes FREE tech support and assistance 



Performance Specs:


    15 + HP @ 8700 rpms

    12 + FT/LBS @ 6850 rpms


"We are an Authorized AA Performance Flash Station and can Flash all AA BMW Perfomance Software in-house."


Price: $799.00